TH6320ZW2007 Honeywell Home Z-Wave T6 Pro Programmable Thermostat with SmartStart
Honeywell Home TH6320ZW2007/U T6 Pro Z-Wave Plus Programmable Smart Thermostat:
1. Overview:
- The TH6320ZW2007 is a Z-Wave Plus certified thermostat designed for both conventional and heat pump systems.
- It's capable of controlling up to three heat stages and two cool stages for heat pumps (including dual fuel heat pump systems) and up to two heat stages and two cool stages for conventional systems (3H/2C HP, 2H/2C Conv.).
- While it measures, displays, and reports indoor relative humidity, it does not directly control humidification equipment.
2. Compatibility:
- The thermostat works with most single and multi-stage conventional and heat pump systems.
- It's designed to be compatible with any Z-Wave compliant controller or gateway. However, for optimal functionality, a security-enabled Z-Wave Plus Controller is recommended.
- It also works with millivolt systems but does not support electric baseboard heat (120-240V).
3. Installation and Power Options:
- The T6 Pro Z-Wave thermostat is one of the easiest smart thermostats to install.
- It can be powered by three AA batteries or via a 24 VAC common wire ("C" wire) if desired.
- Because it's battery-powered, it's straightforward to connect to most HVAC systems.
4. Dynamic Capabilities:
- The thermostat has Dynamic Capabilities configuration settings that can be adjusted from a Dynamic Capabilities-enabled controller in the network.
- Parameters that can be adjusted include Thermostat Mode, Fan Mode, and Set Point Mode.
- Note that some controllers may require the thermostat to be rediscovered or re-included after configuration changes.
5. SmartStart:
- The TH6320ZW2007 includes SmartStart, which simplifies the Z-Wave network inclusion process.
6. Dimensions:
- Actual size: 4.09" x 4.09" x 1.06".
T6 Pro Programmable Thermostat designed to work with any Z-Wave compliant controller or gateway; however, a security enabled Z-Wave Plus Controller is recommended to fully utilize all thermostat features. Works with Heat Pump or Conventional systems and has dual fuel and aux heat lockout with outdoor sensor.
Features
Up to 3H/2C Heat Pump systems or up to 2H/2C Conventional systems
Z-Wave Plus certified with improvement in range, battery life, and bandwidth
Backwards compatibility
Selectable ranges stops
Keypad lockout
DST Enabled
Time based 7-day, 5-1-1 or 5-2 day programmable, non-programmable, or occupancy controlled with Z-wave panel/app integration
5 Year Warranty
Product Specifications
Application: Z-wave systems. 24 Vac systems; Gas, Oil, Electric Warm Air; Hot water Coil; Gas, Oil, Electric Hydronic; or Steam / Gravity Systems
Dimensions (in.): 4-1/16 in. long x 4-1/16 in. wide x 1-3/32 in. deep
Dimensions (mm) 103.6 mm long x 103.6 mm wide x 28 mm deep
Includes Thermostat, UWP mounting system, cover plate, mounting hardware, literature
Comments Compliant with IC Regulations RSS-GEN
Item Type Product
Mounting UWP Mounting System
Electrical Ratings 20 to 30 Vac
Frequency 50 Hz; 60 Hz
Stages Up to 3 Heat/2 Cool Heat Pumps + Dual fuel; Up to 2 Heat/2 Cool Conventional Systems
Electrical Connections UWP Mounting System
Operating Humidity Range (% RH) 5 to 90% RH, non-condensing
Supply Voltage 20 to 30 Vac
Switch Positions (System) HEAT-OFF-COOL-AUTO-EM HEAT
Switch Positions (Fan) AUTO-ON-CIRC
Operating Temperature Range (F): 37 F to 102 F
Operating Temperature Range (C): 2.7 C to 39 C
Shipping and Storage Temperature Range (F): - 20 F to 120 F
Shipping and Storage Temperature Range (C): - 28.9 C to 48.9 C
Network Communications Z-wave
LEDs LED Back Light
Power Method Battery or Hardwired
Ambient Temperature Range (C) 0 C to 50 C
Ambient Temperature Range (F) 32 F to 120 F
Color White
Display Touchscreen
Accuracy (F) 1 F
Accuracy (C) 0.5 C
Differential Temperature (F) ± 1 F
Differential Temperature (C) ± 0.5 C
Switch Type Relay
Programmability 7 day, 5-1-1 day, 5-2 day, 1 week, Occupancy through Z-wave app, or Non-programmable
Terminal Designations RC, R, C, W, W2 - AUX, Y, Y2, O/B, G, K, E, L/A, S, S
Display Size 6.89 sq. in.
Temperature Control Mode Selections Ambient Air Temperature
Changeover Heat only
Setting Temperature Range (F) Heat: 40 F to 90 F
Setting Temperature Range (C) Heat: 4.5 C to 32.0 C
Cool Current 0.02 A to 1.0 A running
Heat Current 0.02-1.0 A
Fan Current 0.02-.5 A
External Sensors Available Optional: Outdoor -- C7089U1006, Remote Indoor — C7189U1005
Occupancy Sensor Through Z-wave panel and App
